ADD:Wutan Industrial Area, Longqan City, Zhejiang Province, China
Katana Prepare related utensils
Warrior knife maintenance
The first step: prepare the relevant equipment must have: playing powder sticks, sticks pull, Dingzi oil (Royal knife oil), cotton, paper selection of paper are: knife pillow, bamboo stickers (with no-clean chopsticks instead).
First, remove the nail
The head is made of bamboo, horns or ivory, etc. The purpose is to fix the knife, so must be removed. Most knives have only one staircase, and now the samurai with a knife for safety, most of them will have two staples. Orthodox staples, the direction is fixed, from the end of the head with the target pull a push force, you can exit the staples, but I noticed that the knife is not necessarily the present. This little details did not notice, it is a pity. So when the removal of the nail, look carefully, one end is relatively large, the other end is relatively small, from the other side of the push, you can exit the staples.
Second, remove the handle
Remove the knife handle when the blade to move forward, otherwise it will be dangerous. Samurai knife is very sharp, slightly careless, will cause serious injury.
First of all, the right hand grip handle, left hand fist, about the top of the right hand to the top of the height of 30 cm, aimed at the knife at the right hand of the tiger's mouth, with moderate force hammer. Hammer the right hand of the tiger's mouth, will hear the crisp metal sound, it is cut feathers and knife and the knife and the impact of each other's pleasant ears, and that you succeeded. The knife (center) will jump out of the handle, you just use the left hand of the two fingers pinch the blade, you can easily pull out the knife.
Three, playing powder
Playing powder ingredients, including animal bone meal, very fine grinding stone powder and so on. The purpose of the powder is to remove the old oil on the blade.
Left hand holding the position of the knife, the blade toward the front, right hand playing powder stick, gently knock on the knife body, about three to five times the interval can be. Personal experience is: If the old oil more, you can play a few times the powder, the powder flutter on the blade surface, and stay for some time, so that powder to absorb oil. Playing powder oil absorption capacity is very strong.
Four, erase the powder
Have heard the powder can be polished knife body of the argument, if the poor quality of playing powder, may accidentally scratch the blade, so the use of playing powder, in addition to careful, but also must pay attention to quality. So the argument on the grinding of the blade must also have experienced senior guidance, it is recommended that we gently use the paper to erase the powder. When wiping out, please note: must be a one-way gently wipe, not violent wipe back and forth, otherwise the blade will be serious scratches. Usually playing powder, erase this step takes two to three times to completely remove the old oil.
Five, reward knife
Clear the old oil knife clean and bright, use this opportunity to appreciate the knife, while checking the blade is any damage. Mr. Shibata's writings have mentioned that the light source from the rear must be used in order to clearly see the blade, ground muscle, boiling, etc., so the purpose of holding the blade is to prevent the light source is blocked by their own body.
- Japan Samurai Sword
- Tool history
- So Cutter Era
- Japan Samurai Sword
- Japan Steel Of The Sword
- "Wrought" is Japan in the process o...
- Hardening, Quenching Is Known As He...
- Steel Products Matching
- Burning Blade
- Samurai Sword To Prevent Water Stai...
- Katana Control The Carbon Content O...
- Chinese Sword Blade And Assembly Of...
- Chinese Sword Saber Method Main
- Katana Note The Blade
- Samurai Sword In Two Cases
- Chinese Sword Performance Advantages
- Katana Historical Records
- Chinese Sword Multi-channel Process
- Samurai Sword Sword Of Conservation